Revisiting the existence of an effective stress for wet granular soils with micromechanics          下载免费PDF全文

Jérôme Duriez  Richard Wan  Mehdi Pouragha  Félix Darve 《国际地质力学数值与分析法杂志》2018,42(8):959-978

A possible effective stress variable for wet granular materials is numerically investigated based on an adapted discrete element method (DEM) model for an ideal three‐phase system. The DEM simulations consider granular materials made of nearly monodisperse spherical particles, in the pendular regime with the pore fluid mixture consisting of distinct water menisci bridging particle pairs. The contact force‐related stress contribution to the total stresses is isolated and tested as the effective stress candidate for dense or loose systems. It is first recalled that this contact stress tensor is indeed an adequate effective stress that describes stress limit states of wet samples with the same Mohr‐Coulomb criterion associated with their dry counterparts. As for constitutive relationships, it is demonstrated that the contact stress tensor used in conjunction with dry constitutive relations does describe the strains of wet samples during an initial strain regime but not beyond. Outside this so‐called quasi‐static strain regime, whose extent is much greater for dense than loose materials, dramatic changes in the contact network prevent macroscale contact stress‐strain relationships to apply in the same manner to dry and unsaturated conditions. The presented numerical results also reveal unexpected constitutive bifurcations for the loose material, related to stick‐slip macrobehavior.  相似文献   

文莱-沙巴盆地深水褶皱冲断带构造变形特征及成因机制          下载免费PDF全文

唐武  赵志刚  张功成  谢晓军  刘世翔  王一博  宋双  王龙  孙瑞  郭佳 《地球物理学报》2018,61(10):4281-4295

为揭示活动陆缘深水褶皱冲断带的特征及成因，本文利用地震和区域地质资料的综合分析，系统阐述了文莱—沙巴盆地深水褶皱冲断带的构造变形特征，并结合盆地演化动力学特点，探讨其构造变形机制及其对深水区油气成藏的影响.研究结果表明，文莱—沙巴盆地深水褶皱冲断带具有"垂向分期、平面分段"的特点，垂向上，以中中新统底界面为界可划分为下部（始新世-早中新世）和上部（中中新世-现今）两套逆冲褶皱冲断体系，其中下部逆冲褶皱冲断带的形成与古南海的俯冲作用密切相关，上部逆冲褶皱冲断带是中中新世以来三角洲前缘重力滑动与苏禄海扩张造成的区域挤压应力远程效应共同作用的结果，且苏禄海扩张造成的远程挤压效应主控平面上南北段褶皱冲断带变形的差异性，导致北段褶皱变形强度大于南段，具有背斜褶皱数量多、褶皱间距离短、逆冲断层倾角陡的特点，南段反之；且晚上新世以来北段深水区地层缩短量大于陆架区伸展量，两者之差为2~6 km，而南段两者相当，仅受三角洲前缘重力滑动影响.整个褶皱冲断带发育断弯、断展、断滑褶皱等3种断层相关褶皱以及叠瓦扇和冲起构造2种逆冲构造组合，是多期NW向挤压应力作用下形成的大型逆冲推覆构造，以前展式向盆地扩展.此外，由于中中新世以来逆冲断层的持续活动，研究区深水褶皱冲断带发育众多构造圈闭，油气成藏条件优越，且南段优于北段，靠近陆坡的近端优于远端，可作为勘探部署重点.  相似文献   

不同厚度饱和砂土中群桩结构动力响应试验研究   总被引：2，自引：2，他引：0       下载免费PDF全文

李雨润  强东峰  邹泽  刘荟达  王海 《地震工程学报》2018,40(4):625-630

液化土中桩基础动力响应规律一直是工程抗震领域关注的热点问题。本文基于非液化砂土和不同厚度饱和砂土中的2×2群桩结构模型振动台试验,通过输入一定峰值加速度和频率的正弦波,对群桩在非液化土层和两种不同厚度饱和砂土层中的横向动力响应特性进行振动台试验研究。研究结果表明:在正弦波输入情况下,非液化砂土中群桩承台加速度和位移时程与台面输入时程相比,波形变化规律与峰值大小均相差不大;而对两种不同厚度饱和砂土中承台加速度和位移峰值放大较多,在相对较薄的饱和砂土中群桩承台加速度峰值较台面输入放大了1.83倍,较台面输出位移峰值放大了1.58倍;在相对较厚的饱和砂土中承台加速度和位移峰值则分别放大了2.18倍和1.91倍,说明在相同输入条件下,较厚的饱和砂土在发生液化后群桩承台的动力响应更加显著。  相似文献   

太平洋深海沉积物来源的菌株Tenacibaculum sp.HMG1对孔雀石绿降解特性的研究     

曲武  洪国粦  赵晶 《海洋学报(英文版)》2018,37(6):104-111

本文在太平洋深海沉积物中分离得到一株孔雀石绿降解菌株，鉴定命名为Tenacibaculum sp.HMG1。通过菌株生长实验和高效液相色谱的研究表明， HMG1菌株可以在20 mg/L的孔雀石绿中维持较快的生长速率，并且在12 h内可降解98.8%的孔雀石绿，这证明该菌株具有很高的孔雀石绿耐受能力和降解活性。通过基因组测序在HMG1菌株发现一条过氧化物酶基因可能参与了孔雀石绿的降解，随后利用原核表达获得了相应的重组蛋白。实验表明，该重组过氧化物酶具有极强的活性，可在1000 mg/L的孔雀石绿中发挥降解功能。本文利用液相色谱-质谱联用（LC-MS）技术对孔雀石绿的菌株降解产物和重组酶降解产物进行鉴定，并基于鉴定结果推测了两种降解途径。结果发现两种降解方式存在共同的降解途径。此外，孔雀石绿降解条件的实验结果证明重组过氧化物酶可以在低温（20℃）、复杂的pH值（6.0–9.0）、高盐度（100 mmol/L）、金属离子和EDTA等反应条件下依旧维持很高的孔雀石绿降解活性。以上实验结果表明，HMG1菌株和重组过氧化物酶均在孔雀石绿污染生物修复方面具有很大潜力。  相似文献   

豫西南泥湖地区辉长岩地球化学特征及其与成矿关系          下载免费PDF全文

刘辉 《山东国土资源》2018,34(3)

豫西南泥湖钼矿集区是以花岗斑岩体为中心的钼多金属矿床系列,区内出露大面积加里东期变辉长岩和燕山期辉长岩。通过分析区内辉长岩的岩石学、年代学、地球化学和成矿元素等方面特征,研究其在成岩成矿过程中的作用。区内加里东期变辉长岩和燕山期辉长岩成矿元素总稀土含量低,稀土元素球粒陨石标准化曲线右倾平缓,具有明显的Eu,Tm元素的异常;同比世界基性岩,自晚元古代上地幔主要成矿元素(除钨元素以外)基本没有明显的富集,主成矿元素钼含量呈明显的亏损,预示燕山期成矿花岗质岩浆没有从上地幔获得主要成矿物质。初步认为大规模的钼多金属成矿带的形成与基性岩浆的底垫作用相关,基性岩浆的底垫作用为下地壳部分熔融形成岩浆房提供了热源。  相似文献   

张力腿平台筋腱支撑浮筒结构设计研究     

王火平  金文学  吕东  范志峰  王立权 《海洋工程》2018,36(3):69-75

在张力腿平台筋腱与海底桩基连接后,需要筋腱支撑浮筒为筋腱提供足够的浮力,保证筋腱在平台运抵工作海域之前不会发生倾覆。针对南海油田自主研发的张力腿平台筋腱实际尺寸及设计要求,设计了适用于1 061 mm(40英寸)筋腱、500米水深的张力腿平台筋腱支撑浮筒,并对筋腱支撑浮筒主要受力进行了分析计算,根据所计算的载荷情况对关键部件进行了有限元仿真分析,验证了结构强度的可靠性,并得到了结构的应力集中点与最大变形点,为筋腱支撑浮筒的结构设计提供了参考。  相似文献   

太原盆地及周边地区双差层析成像   总被引：2，自引：0，他引：2       下载免费PDF全文

王长在  吴建平  杨婷  王未来  范莉苹  房立华 《地球物理学报》2018,61(3):963-974

山西断陷带位于鄂尔多斯与华北地块交汇处，是我国著名的历史强震活动带之一，尤其是断陷盆地中部区域，6级以上地震频发.本研究旨在揭示忻定盆地中南部、太原盆地及临汾盆地中北部交汇处的深部结构特征，分析盆地的形成和演化，探讨该区域孕震环境.利用山西地震台网观测数据以及固定地震台站融合流动台站得到的地震数据，共7455个地震事件，采用双差层析成像方法，反演得到了太原盆地及周边地区的三维P波速度结构及精定位结果.层析成像结果显示，忻定盆地、太原盆地的中上地壳为明显的低速异常，被高速的石岭关隆起隔开，深部结构特征相对简单.太原盆地、临汾盆地及灵石隆起之间的深部结构特征较为复杂，反映了两个盆地演化过程的复杂性.穿过忻定盆地的速度剖面显示，在中地壳存在明显的低速异常体，且大部分地震都发生在该低速体上方；穿过太原盆地北部的剖面显示，该区域在20~25 km深度范围内有较密集的地震分布，并勾画出交城断裂呈犁形的断层特征；穿过太原盆地中部的剖面显示，太原盆地自西向东沉积层逐渐减薄；穿过临汾盆地的剖面揭示，汾东断裂在浅部倾角较陡，随深度增加倾角逐渐变小，倾向向东.  相似文献   

基于BSWT-DDTFA方法的地球天然脉冲电磁场震前信号时频分析研究          下载免费PDF全文

郝国成  白雨晓  吴敏  王巍  刘辉 《地球物理学报》2018,61(10):4063-4074

地球天然脉冲电磁场（ENPEMF）信号，可理解为地球天然变化磁场的瞬间扰动，携带了大量有用的地质构造及其动力学信息.研究ENPEMF信号所蕴含的时间-频率联合分布特点，有利于深入了解目标对象的地球物理现象及其地质动力学原理.本文针对ENPEMF信号的非平稳特点，在数据驱动时频分析方法（DDTFA）的基础上提出了基于二值化同步压缩小波变换的改进算法（BSWT-DDTFA）.该算法可以实现数据驱动初始相位自动赋值的功能，具有自适应性.实验仿真和实际数据均证明了该改进算法不仅能够得到较为精确的频率曲线和更加清晰的时频分布，而且具有较强的抗噪声能力.以2013年芦山M_S7.0地震为例，利用BSWT-DDTFA方法提取ENPEMF信号的时频特性，结果表明ENPEMF信号的时间-频率-幅度分布在震前有明显的异常特征.  相似文献   

Using the applied element method for modelling calcium silicate brick masonry subjected to in‐plane cyclic loading     

Daniele Malomo  Rui Pinho  Andrea Penna 《地震工程与结构动力学》2018,47(7):1610-1630

The response of calcium silicate unreinforced masonry construction to horizontal cyclic loading has recently become the focus of experimental and numerical research, given its extensive use in some areas of the world that are now exposed to induced earthquakes (eg, north of the Netherlands). To assess the seismic behaviour of such construction, a relatively wide range of modelling methodologies are available, amongst which the discrete elements approach, which takes into account the intrinsic heterogeneity of a brick‐mortar assembly, can probably be deemed as the most appropriate computational procedure. On the other hand, however, since discrete elements numerical methods are based on a discontinuum domain, often they are not able to model every stage of the structural response adequately, and because of the high computational burden required, the analysis scale should be chosen carefully. The applied element method is a relatively recent addition to the discrete elements family, with a high potential for overcoming the aforementioned limitations or difficulties. Initially conceived to model blast events and concrete structures, its use in the earthquake engineering field is, of late, increasing noticeably. In this paper, the use of the applied element method to model the in‐plane cyclic response of calcium silicate masonry walls is discussed and scrutinised, also through the comparison with experimental results of in‐plane cyclic shear‐compression tests on unreinforced masonry walls.  相似文献   

HOLOCENE ACTIVE CHARACTERISTICS OF THE NORTHERN SEGMENT OF THE MINJIANG FAULT IN THE EASTERN MARGIN OF THE TIBETAN PLATEAU     

LI Feng  LIU Hua-guo  JIA Qi-chao  XU Xi-wei  ZHANG Xiao-liang  GONG Fei 《地震地质》2018,40(1):97-106

As a part of the north-south seismic zone in China, a lot of M6.0-7.2 earthquakes have occurred in the margin faults of the Minshan block in history. This work attempted to characterize the geometry and activity of the north section of the Minjiang fault in this region based on high-resolution satellite images, geologic and geomorphic investigations, micro-geomorphic surveys, and trench excavation. The results show left-lateral-slip and Holocene activity of this structure. Along it, the offset landform has a continuous linearity on Ⅱ terraces near the Chuanpan village. The vertical height of the fault scarp measures 3.1 meters, which is almost the same as the accumulative horizontal displacement of the gully. The accumulative horizontal shortening due to faulting is 3.0 meters. Calculation using the model of displacement-dependent characteristic earthquakes shows both the vertical and horizontal co-seismic displacements and the horizontal shortening amount are about 1.0 meter. While strata dating suggests that the vertical and horizontal slip rates are all about 0.7-0.9mm/a, and the horizontal shortening rate is approximately 1.0-1.1mm/a. The excavated trench, perpendicular to the fault trace, reveals low-angle thrust dipping in 260åt 29°. From the relationship of the fault, colluvial wedge and stratigraphy ages, three palaeoseismic events are identified from youngest to oldest at 0-295a BP, 1 405-1 565a BP, and 2 750-2 875a BP, respectively, with recurrence intervals 1 110-1 565 years and elapsed time about 0-295 years。According to the relationship between magnitude and active parameters, it is considered that the northern segment of the Minjiang fault is capable of generating M7 or greater earthquakes. Now it is in the process of stress accumulation, having a certain seismic risk.  相似文献